Masonry contractor in Tamarac, FL - repairs that fix the real cause
Elite Deerfield Beach Concrete & Masonry is a masonry contractor working in Tamarac, FL. We repair brick, block and stone, repoint tired joints, fix chimneys, and build new walls, walkways, paver drives and outdoor kitchens for homes and condos.
Masonry work in Tamarac, the way we see it
Tamarac is a city of neighborhoods. Most of the houses we work on sit in planned subdivisions, townhouse rows and condo communities, with shopping plazas along the main roads. We come over from Deerfield Beach and do the same work here that we do next door in Margate and Coral Springs.
The calls from here are the ones I get everywhere: cracked joints, a tired chimney, or a new wall, walk or outdoor kitchen someone has been planning for a while. The price moves with the size of the job, the material and what we find once we see why something failed. The schedule usually turns on approvals more than on the masonry itself, and the estimate gives you the figure for your own job. So many homes here share a wall, a common walk or a matching look down the street that we work out what your association allows and what's yours to change before we lay anything.
Masonry services we do in Tamarac
When a crack opens in the block or slab edge of your Tamarac house, we track down what's moving it before filling anything, so you're not paying twice.
A Tamarac chimney that's shedding brick or leaking at the roof gets a close look at the crown and joints before we pick between repair and rebuild.
Brick accents and columns on Tamarac homes often lose mortar first. We grind out the weak joints and refill them so water stops getting behind the face.
In a subdivision where the houses match, a repair has to blend in, so we match cracked or loose brick for size and color before setting it back.
We lay paver driveways on a packed base with a border that keeps them from creeping, and in HOA communities we check the approved colors first.
Retaining walls here are usually low ones holding a raised bed or patio edge, and each still gets drainage behind it so water has somewhere to go.
For older brick and stone on a Tamarac house or condo building, we clean, repoint and replace only what's failed, keeping the original look where it's sound.
Indoors or out on a Tamarac patio, a masonry fireplace starts with where it sits and how it vents, so we plan both before any block goes up.
Stone veneer can dress up a plain stucco entry or column on a Tamarac home, and we set it over a backing that lets trapped water drain.
Block privacy walls along a back lot line or between townhouses get a footing sized for the wall, steel and concrete in the cores where needed, and stucco to match.
For an addition on a Tamarac house, we lay foundation block on a level, properly sized footing, because every row above inherits any mistake below.
We build block or stone kitchen islands on Tamarac patios, with the openings for the grill, sink and any gas or electric lines planned before we start.
A sunken walk to a townhouse or condo door trips people up, so we rebuild it in brick, pavers or stone over a packed base that sits level.
A new brick garden or entry wall needs a footing and a few planned gaps that let it move, and we match the brick to your house.
We lay natural stone for columns, planters and pool-deck steps around Tamarac homes, with a mortar chosen for that stone so it bonds well.
When a few joints on a Tamarac planter or garden wall have washed out, pointing fills them with color-matched mortar, a smaller job than full tuckpointing.
What Tamarac homes and HOAs ask of masonry
I come out to every Tamarac job and write the estimate myself, because the person pricing the work should be the one who's read the wall.
The cause, found first
I'd rather spend extra time looking than send a crew to fix only the crack you can see.
Permits and HOA forms handled
When a job needs a permit, we pull it, book inspections and tell you early what the city or HOA needs.
A mason leads the crew
An experienced mason runs the work on site, and I check in on the job as it goes.
Insured on every Tamarac job
We're licensed and fully insured, whether the job is one cracked joint or a brand new block wall.
You'll know what to watch
I show you what failed and why, so you can spot the next problem on your own.
Tamarac masonry questions we hear
Who issues permits for masonry work in Tamarac, FL?
The city's Building Department issues permits in Tamarac and enforces the state building code here. Applications go in online through the city's permitting system, and a permit isn't finished until every required inspection passes and the permit is closed. The Building Department is the office to ask whether your job needs one.
Do contractors have to register with the City of Tamarac before applying for a permit?
Yes, every contractor has to be registered with the city before they can be selected on a permit application. It's a step the contractor takes, not you, and the city charges no fee for it.
How do I find out if my Tamarac lot is in a flood zone?
Call the city's Building Department, which gives floodplain information to residents, at 954-597-3420. The newest federal flood insurance rate maps for the county took effect July 31, 2024, so ask about those maps if you're planning a new wall or slab and want to know where your lot sits.
How much does masonry work cost in Tamarac, FL?
The price comes down to how big the job is, what it's built from and how much damage is hiding behind what you can see, so your real number comes from looking at it. Matching brick or stone to an existing house, working in a tight back yard or a condo common area, and any permit or HOA approval add to it, while a plain block wall with easy access costs less than a stone one. I'll price your job on site.
How long does a masonry repair take in Tamarac?
The hands-on work is usually the shorter part, and most of the wait comes from the approvals around it. If there's a permit, the inspections set the pace, and many associations here want their own sign-off before we start. Once I've seen the job, I can tell you which of those your schedule turns on.
What licenses does a contractor need to work in Tamarac?
Anyone doing business in Broward County needs a county local business tax receipt unless they're exempt, and the City of Tamarac issues its own business tax receipts as well. Florida's licensing department licenses certified contractors, who have to pass a state exam first. A state-certified business with a receipt from its home Florida county can work statewide without the Broward one, though some Broward cities still want it before they issue permits.
Don't see your city? Call us
Pick your city below for its page, or call (754) 253-5630 if yours isn't listed, since we work in more cities than we name here.
Get your Tamarac masonry estimate started
Call (754) 253-5630 after work or on the weekend, since we answer until 11 PM on weekdays, or use the form to tell us about your job.