Masonry Contractor in Boynton Beach - Block and Brick Work That Holds Up to Summer Rain
Elite Deerfield Beach Concrete & Masonry repairs and builds block walls, brick, pavers, chimneys and outdoor kitchens for homes and condos in Boynton Beach, FL. We find out why masonry is failing before we fix it.

Masonry contractor for Boynton Beach homes
Boynton Beach sits at the north end of the cities we cover from Deerfield Beach, and the calls here sound a lot like the ones we get from Delray Beach. We see cracked block walls, mortar joints that let water in, paver driveways that have sunk at the edges, and plenty of owners who want a new garden wall or an outdoor kitchen. The houses, townhomes and condo buildings here are mostly concrete block, so most of our work comes down to block, mortar and the ground under them.
The paperwork follows Boynton Beach's own permit rules and Palm Beach County's flood maps, which aren't what we work with farther south in Lauderhill. Price usually moves with how far down the cause sits and how much has to come out, and the schedule turns on the permit and the rain. The ground matters most, because low, sandy lots hold water, so before we set a wall or a driveway we work out where the water goes.
What we build and fix in Boynton Beach
Stair-step cracks in the block or a door that suddenly sticks can mean the ground under the house moved, so we find out why before we repair the foundation.
Chimneys here see more rain than fire. The damage is usually loose bricks and a cracked crown letting water in, which we rebuild and seal off.
Summer storms push water into worn mortar on older brick, so we grind out the tired joints and pack in fresh mortar matched to your wall.
We replace cracked or flaking bricks on planters, steps and accent walls, and we look for the water or movement that broke them in the first place.
Paver driveways on low, sandy lots tend to sink where water collects. We rebuild the base under them and set pavers that shed rain away from the house.
On lots that drop toward the water or a neighbor's yard, a retaining wall needs drainage behind it, and we build that in from the first course.
Salt air and years of sun wear down older masonry near the coast. We restore it with materials that match what's already there instead of covering it up.
Want a fireplace for the few cool nights? We build the firebox and surround in brick or stone, inside the house or out on the patio.
Stone veneer puts the look of stone on a block wall or column, and we set it over a backing that lets trapped water drain out.
We build garden and privacy walls in concrete block like the houses here, with steel and concrete in the hollow cores and a footing sized for the ground.
For additions and new structures, we lay the foundation block walls that carry the load, after checking the ground and drainage before the first block goes down.
Outdoor kitchens get used most of the year here, so we build counters and grill islands in block, brick or stone that take sun and rain.
A walkway that holds puddles after an afternoon storm turns slick. We build paths in pavers, brick or concrete with enough slope to drain.
Brick works well for garden walls, mailbox columns and entry walls, and we lay it with weep holes so summer rain has a way out.
For natural stone walls, steps and columns, we pick stone that holds up to heat and steady humidity, then cut and set it by hand to fit.
When only a few joints have cracked or washed out, we point them, filling them with fresh mortar, before rain gets behind the brick and the job grows.
What Boynton Beach homes ask of masonry
I come out myself, tell you plainly what's causing the problem, and our crew fixes that cause, not just the crack you can see. Satisfaction guaranteed.
The cause found first
We trace why a joint cracked or a wall leaned before we quote a fix, so you're not paying for a patch.
Work planned around storms
We schedule mortar work and pours around summer storms and slope every new surface so water leaves the house.
Permits pulled for you
When a job needs a permit, we pull it, line up inspections and tell you early if we need your signature or HOA forms.
A mason leads the crew
We're licensed and fully insured, an experienced mason runs every crew, and I check in as the job goes.
You learn what to watch
I show you the signs that matter on your walls and joints, so you can spot the next problem yourself.
Boynton Beach masonry questions
Does a masonry job under $7,500 in Boynton Beach need a permit?
It still might. A state law in effect since July 1, 2026 lets some work under $7,500 on a single family home skip the permit, but only with a written request for exemption, and only for a complete single project that isn't split up to stay under the line. The city says structural work, fences and driveways still need a permit from the Building Department at any cost, and licensing, zoning, floodplain and HOA rules still apply, so I check each job against the city's page on the new law when I come out. If it needs a permit, we pull it.
How do I find out if my Boynton Beach home is in a flood zone?
Call the city's Development Department at 561-742-6350, because it reviews the floodplain information on file to place your property. New FEMA flood maps took effect in December 2024, and Palm Beach County says they moved thousands more residents in its eastern part into high-risk zones, so an answer from a few years ago may be out of date. The county sends Boynton Beach residents to the city for this.
What changes for a masonry project if my home is in a flood zone?
You'll need a permit, because the city requires one for all development in the Special Flood Hazard Area, filling and grading included, and the under-$7,500 exemption doesn't cover a property even partly in a flood hazard area. Big jobs carry one more rule. When the work costs half or more of the building's market value, the city counts it as a substantial improvement, and the home's lowest floor has to sit one foot above the base flood elevation, the flood height the maps plan for, which is why I ask about flood zones before I price a foundation or an addition.
What licenses does a masonry contractor need to work in Boynton Beach?
A contractor needs a business tax receipt from the City of Boynton Beach before starting work in the city, and anyone selling services in Palm Beach County needs a county business tax receipt as well. For state licensing, Florida's licensing department says anyone seeking a certified contractor license has to pass a state exam first, and the new permit law left contractor licensing unchanged. We're licensed and fully insured, and it's fair to ask any contractor, us included, what they hold.
What causes cracked mortar and block walls in Boynton Beach?
Water and ground movement cause most of it, not cold. West Palm Beach averages about 62 inches of rain a year, with June, August and September the wettest months, and it stays hot nearly year-round, so the damage comes from water soaking cracked joints and softening the soil under footings. When I look at a crack, the first thing I'm after is where the water comes from.
How much does masonry repair cost in Boynton Beach?
Your price comes from the size of the job, how much has to come out before new work goes in, and the materials you pick, so I give you a figure after I've seen it in person. Repairs cost more when the cause sits below the surface, like a footing or a drainage problem, and jobs that need a permit take longer because of the inspections. The estimate is free and done at your house.
Other cities we work in, and yours
These pages don't cover every city we work in. If yours isn't listed, call (754) 253-5630 and ask, because we likely work there too.
Call about your Boynton Beach masonry
Call (754) 253-5630 or use the form, and add a photo of the crack or wall so I know what to look at first.




